---
title: "Epoxy Flooring Installation in Marietta | Marietta Epoxy Flooring"
description: "Request an epoxy flooring estimate in Marietta. Concrete grinding, repair, and epoxy coating for garages and basements, scoped and quoted in writing."
canonical: "https://www.mariettaepoxyflooring.com/"
lastmod: "2026-11-15T10:04:59.403Z"
---

# Epoxy Flooring Installation in Marietta

![A modern room featuring dark grey custom shelving and cabinetry, a reflective epoxy floor, and integrated LED strip lighting on the ceiling and along the base.](https://utmost-ibex-736.convex.cloud/api/storage/4beb325c-7236-43c0-981e-ef6bda1e41c7)

A sealed, easy-to-clean floor with every material, layer and cure time in writing before work begins.

- **Itemized Written Estimate**: Materials, layer thickness and cure times listed before anything is booked.
- **Full Prep Checklist**: Grinding, degreasing and crack repair on every job, not treated as add-ons.
- **Curing Inspection Included**: The installer returns and provides a documented handover once the floor is ready.

## Concrete floor coating from slab assessment to documented handover

We take enquiries from homeowners and business owners and scope the full job: prep, coating and final inspection.

- **Epoxy Flooring Installation**: A documented prep checklist covering grinding, degreasing and crack repair ensures the epoxy bonds and stays bonded.
- **[Garage Epoxy Coating](https://www.mariettaepoxyflooring.com/services/garage-epoxy-coating)**: Diamond grinding, crack patching, and a moisture check prepare the slab before a base coat, flake blend, and topcoat are applied.
- **[Concrete Grinding](https://www.mariettaepoxyflooring.com/services/concrete-grinding)**: Diamond grinding opens the slab to a CSP 2-3 surface profile so epoxy resin bonds mechanically, not just chemically.
- **[Concrete Surface Preparation](https://www.mariettaepoxyflooring.com/services/concrete-surface-preparation)**: Mechanical profiling to ICRI CSP 2-3 removes old sealer, adhesive residue, and grease so coatings bond without peeling.
- **[Concrete Crack Repair](https://www.mariettaepoxyflooring.com/services/concrete-repair)**: Crack width and movement determine whether polyurethane sealant, epoxy filler, or a patching compound is the right fix.
- **[Self-Leveling Concrete Overlay](https://www.mariettaepoxyflooring.com/services/self-leveling-concrete-overlay)**: A cementitious overlay poured at 3/16 to 1/2 inch fills low spots and restores a flat, bondable surface across the slab.
- **[Concrete Resurfacing](https://www.mariettaepoxyflooring.com/services/concrete-resurfacing)**: A bond test and crack inspection confirm whether your slab qualifies before any resurfacing material is applied.
- **[Traffic Coating Application](https://www.mariettaepoxyflooring.com/services/traffic-coating-application)**: A primer adhesion layer, epoxy base coat, and abrasion-rated topcoat applied at 10-20 mils total resist wear and surface dusting.
- **[Concrete Polishing](https://www.mariettaepoxyflooring.com/services/concrete-polishing)**: A grit progression from 30-mesh to 800-mesh or finer refines the slab surface to a specified sheen without any topcoat.
- **[Concrete Sealing](https://www.mariettaepoxyflooring.com/services/concrete-sealing)**: A porosity check determines the right sealer type, applied by roller or sprayer for water-beading protection that typically lasts 2-5 years.
- **[Pool Deck Resurfacing](https://www.mariettaepoxyflooring.com/services/pool-deck-resurfacing)**: A slip-resistant texture additive and UV-stable acrylic overlay restore traction and color on faded or cracked pool surrounds.
- **[Terrazzo Flooring Installation](https://www.mariettaepoxyflooring.com/services/terrazzo-flooring-installation)**: Epoxy resin, aggregate chips, and divider strips are poured and hand-troweled to a sealer finish rated for decades of foot traffic.

- **Slab Moisture Testing**: Checks for trapped moisture before any coating is specified.
- **Diamond Grinding**: Opens the slab to a bondable CSP 2-3 surface profile.
- **Degreasing**: Removes oil contamination that prevents epoxy adhesion.
- **Crack Repair**: Filled and troweled flush before primer goes down.
- **Primer & Base Coat**: Applied in sequence for a mechanically sound bond.
- **Flake Blend Broadcast**: Decorative chips scattered for a consistent finish.
- **Polyaspartic Topcoat**: UV-stable, vehicle-traffic-rated seal over the full system.
- **Anti-Slip Additive**: Mixed into the topcoat for wet-area traction.

## The difference between a floor that lasts and one that peels within a year

Most epoxy failures trace back to skipped prep steps, not the coating itself.

- **Skipped Surface Grinding**: Without diamond grinding to a CSP 2-3 profile, epoxy sits on a smooth surface and delaminates under foot or vehicle traffic.
  **Documented Prep Checklist**: Every job follows a written prep checklist, grinding, degreasing and crack repair, before primer or base coat is applied.
- **Undetected Slab Moisture**: Georgia’s humid summers raise slab moisture levels; coating over a damp slab traps vapor and causes bubbling and bond failure.
  **Moisture Testing First**: The installer runs a moisture test before specifying any coating system, particularly on older Cobb County slabs with basement exposure.
- **Vague Verbal Quotes**: A quote with no breakdown of prep steps or materials leaves you with no way to verify what was, or was not, done on your floor.
  **Itemized Written Estimate**: Every estimate lists materials, layer thickness and cure times in writing before any work is scheduled, no verbal-only agreements.
- **UV Yellowing Topcoat**: Standard epoxy topcoats yellow under Marietta’s high UV exposure, leaving a discolored finish within one to two seasons.
  **Polyaspartic UV-Stable Finish**: A polyaspartic topcoat is specified for UV stability, resisting yellowing and surface wear under direct sunlight and vehicle traffic.

## Why Marietta Epoxy Flooring?

Every job is arranged with accountability built in, written estimates, a prep checklist and a final inspection before we consider the work done.

- **Everything in Writing Before Work Starts**: Your estimate lists every material, layer thickness and cure time. Nothing is verbal, nothing is assumed.
- **Prep Is Never Treated as an Add-On**: Grinding, degreasing and crack repair are included in the prep checklist on every job, not billed as extras after the fact.
- **A Final Inspection Closes Every Job**: The installer returns for a curing inspection and hands over a written record of every material and layer applied.
- **Georgia Humidity Is Factored In**: Installers schedule degreasing and cure windows around Marietta’s humid summers, not against them.
- **Older Slabs Get Assessed Before Coating**: Cobb County homes with suspected basement moisture receive a slab assessment before any coating system is chosen.

## Three steps from your first enquiry to a finished, documented floor

1. **Request Your Estimate**: Tell us about your slab and we’ll schedule an assessment and quote materials, prep and cure times in writing.
2. **Confirm & Schedule Work**: Once you approve the itemized estimate, the installer schedules grinding, degreasing, crack repair and coating around your timeline.
3. **Inspect & Hand Over**: The installer returns for a final curing inspection and provides a documented handover so you know exactly what is on your floor.

[Request Your Estimate](https://www.mariettaepoxyflooring.com/contact)

## What epoxy flooring installation actually involves, step by step

Understanding the sequence helps you ask the right questions and spot a quote that skips something important.

Every installation starts with a slab assessment and moisture test. Marietta’s humid summers raise moisture vapor levels in concrete, and coating over a damp slab is the leading cause of bubbling and bond failure. The installer uses a plastic sheet or calcium chloride test to confirm the slab is dry enough to accept a primer. On older Cobb County homes with attached garages or basement floors, this step determines whether a moisture barrier primer is needed before anything else goes down. Only after the slab passes does surface preparation begin.

Surface preparation covers three tasks: diamond grinding to a CSP 2-3 profile, degreasing to remove oil contamination, and crack repair using the right filler for the crack type. Hairline cracks get a flexible polyurethane sealant; wider cracks are chased and filled with a rigid patching compound troweled flush. Grinding with a diamond cup wheel removes old coatings and opens the concrete so epoxy bonds mechanically, not just chemically. A HEPA vacuum on a dust shroud keeps the workspace clean throughout. Skipping or rushing any of these steps is why most epoxy floors peel within a year.

Once the slab is prepared, the installer applies a primer layer, an epoxy base coat, a decorative flake blend broadcast, and a polyaspartic topcoat. The polyaspartic finish is UV-stable and vehicle-traffic-rated, which matters in Marietta’s high-sun environment where standard epoxy topcoats yellow within a season or two. An anti-slip additive can be mixed into the topcoat for garages or wet areas. Cure time varies by product and ambient humidity, and the installer schedules each stage around Georgia’s conditions. A final curing inspection confirms the floor is fully set before the documented handover is provided.

[Request Your Estimate](https://www.mariettaepoxyflooring.com/contact)

## Homeowners, business owners & property managers across Marietta

Different floors, different uses, the prep checklist and written estimate apply to all of them.

- **Homeowners**: Marietta homeowners with a garage or basement slab that holds oil, shows cracks, or has a peeling old coating. We schedule an assessment of the concrete, quote every prep step and material in writing, and follow up with a final inspection once the floor is cured.
- **Small Business Owners**: Small business owners with a concrete floor showing wear from daily foot and vehicle traffic who need a durable, easy-to-clean surface. The scope specifies a traffic-rated coating system and comes with a written estimate with cure times so you can plan around downtime.
- **Property Managers**: Property managers overseeing Cobb County units with older concrete slabs that need coating or resurfacing between tenants. We schedule a slab assessment and moisture check first, then provide a documented handover so there is a written record of what was installed.

## Typical Epoxy Flooring Installation Prices

| Job | Typical cost |
| --- | --- |
| Garage epoxy coating | $4-$9 per sq ft |
| Epoxy coating with topcoat | $6-$14 per sq ft |
| Decorative epoxy floor system | $8-$15 per sq ft |

These prices are estimates and often vary with the condition, size and scope of each job. Message us for a free, no-obligation quote.

[See all prices](https://www.mariettaepoxyflooring.com/pricing)

## How We Arrange Your Floor Installation

Marietta Epoxy Flooring covers garage, basement and small business floors across Cobb County. Every job follows a documented prep and coating process, then a final curing inspection and handover once the floor is ready.

### Why We Do This

We exist to take the guesswork out of epoxy flooring for Marietta homeowners and business owners: every material, layer thickness and cure time is put in writing before work begins.

- **Transparency**: Every estimate lists materials, layer thickness and cure times before work starts.
- **Preparation**: Grinding, degreasing and crack repair are completed before any coating is applied.
- **Accountability**: A final curing inspection and documented handover close out every completed job.
- **Specificity**: Quotes name the actual products, layer counts and cure schedules, not ranges.

## Epoxy Flooring Installation in Marietta

We schedule assessments across a wide service area, so your floor gets assessed and quoted with the local conditions in mind.

- **[Marietta](https://www.mariettaepoxyflooring.com/)**: Home visits for Oakton, Elizabeth & Northwest Marietta
- **[Downtown Marietta, Cobb County](https://www.mariettaepoxyflooring.com/areas/downtown-marietta-ga)**: Garage & basement floors near the Square and Church Street
- **[Atlanta, Fulton County](https://www.mariettaepoxyflooring.com/areas/atlanta-ga)**: At-home flooring visits in Grant Park, West End & Inman Park.
- **[Cobb County](https://www.mariettaepoxyflooring.com/areas/cobb-county-ga)**: Garage floors in East Cobb, Smyrna & Kennesaw homes

### Request an Estimate Near You

Enter your zip code and we’ll confirm whether we arrange epoxy flooring installations in your area.

[Request Your Estimate](https://www.mariettaepoxyflooring.com/contact)

## Questions homeowners ask before booking epoxy flooring

### How do I know the grinding and degreasing will actually happen?

Surface grinding, degreasing and crack repair are on a checklist that applies to every job, not optional steps. The written estimate lists these prep items explicitly, so you have a record of what was agreed before work begins.

### Will epoxy hold up in a humid Georgia garage or basement?

Georgia’s humid summers narrow the safe application window for epoxy. Installers are selected with that in mind and schedule coating work within appropriate humidity and temperature ranges. A moisture-tolerant primer is chosen after slab moisture levels are confirmed.

### My slab has cracks, does that rule out epoxy?

No. Cracks are routed, cleared of loose material and filled with a repair compound matched to the slab’s load conditions before any coating is applied. Skipping this step is what causes cracks to telegraph through the finish, it’s not skipped here.

### What if the floor peels after a few months, who is responsible?

The written estimate and documented handover give you a record of every material and prep step applied to your slab. If a failure occurs, you have the specification in writing to support any claim rather than relying on memory or a verbal agreement.

### How long will the floor be out of use during curing?

Cure times vary by product and conditions. A polyaspartic topcoat typically allows light foot traffic within 24 hours and vehicle traffic within 72 hours, but the installer confirms the exact timeline in the written estimate based on your slab and the products specified.

### What happens if I delay getting the slab assessed?

Cracked or moisture-damaged concrete continues to deteriorate. Wider cracks require deeper repair compound and longer prep time. A slab that develops structural movement may eventually need replacement rather than resurfacing, a significantly higher cost than coating a slab that’s still sound.

## Get an Itemized Estimate for Your Floor

Tell us about the slab and we’ll schedule an assessment and quote materials, layer thickness and cure times in writing before anything is booked.

[Request Your Estimate](https://www.mariettaepoxyflooring.com/contact)

## Business details

### Contact

- **Email**: [contact@mariettaepoxyflooring.com](mailto:contact@mariettaepoxyflooring.com)
- **Based in**: Marietta, GA, 30066
- **Enquiries**: [Send an enquiry](https://www.mariettaepoxyflooring.com/contact) — We ask for your name, phone number, email and a message.

### Opening hours

- **Monday**: 08:00 – 18:00
- **Tuesday**: 08:00 – 18:00
- **Wednesday**: 08:00 – 18:00
- **Thursday**: 08:00 – 18:00
- **Friday**: 08:00 – 18:00
- **Saturday**: 10:00 – 16:00
- **Sunday**: 10:00 – 16:00
