---
title: "Concrete Resurfacing in Marietta | Marietta Epoxy Flooring"
description: "Concrete resurfacing renews worn slabs with a protective epoxy layer. Hides cracks, stains, and damage while adding color and durability."
canonical: "https://www.mariettaepoxyflooring.com/services/concrete-resurfacing"
lastmod: "2026-11-15T10:04:59.403Z"
---

# Concrete Resurfacing in Marietta

![A tradesperson in work boots and gloves uses a levelling rake to spread self-leveling screed on a concrete floor during construction.](https://utmost-ibex-736.convex.cloud/api/storage/c7089adb-fa82-4ab1-b468-d1af725ad0ac)

A structurally sound slab restored to a clean, even finish, without tearing out and replacing the whole thing.

- **Written Estimate**: Itemized quote listing materials, layer thickness and cure times.
- **Bond Test Included**: Confirms adhesion before any resurfacing mix is applied.
- **Prep Checklist**: Covers crack repair, grinding and degreasing before work starts.
- **Documented Handover**: Final curing inspection with a written record of all steps completed.

## Why some resurfacing jobs peel within a season

The difference between a finish that holds for years and one that fails early comes down to what happens before any material is applied.

- **Skipped Moisture Check**: Clay-heavy soils wick moisture into slabs from below, and a damp substrate causes the resurfacing mix to lose adhesion within months.
  **Moisture Test Before Mix**: A moisture check is run on every slab before the bonding agent is specified, so adhesion failure is caught before it can happen.
- **No Bond Test Run**: Applying a resurfacing mix to a slab that has not been bond-tested means the new layer may separate cleanly from the substrate under traffic or temperature change.
  **Bond Test on Every Slab**: A pull-off bond test confirms the substrate will hold the new layer before any resurfacing mix is ordered or applied.
- **Cracks Left Unrepaired**: Filling surface cracks without assessing their depth or pattern means structural movement will telegraph straight through the new finish layer.
  **Crack Depth Assessment**: The installer maps crack width, depth and pattern to separate stable surface cracks from active movement before any repair material is chosen.
- **Dirty Substrate**: Grease, dust or laitance left on the slab surface prevents the bonding agent from making full contact, creating weak spots across the finished area.
  **Surface Cleaning & Prep**: Mechanical surface cleaning removes contaminants down to bare concrete so the bonding agent achieves full contact across the entire slab.

## Resurfacing services for driveways, patios, garage floors & pool decks

Each surface type has its own load, drainage and finish requirements, the assessment accounts for all of them.

- **Driveway Resurfacing**: Spalled or stained driveways are assessed for slab stability, then crack-repaired and resurfaced to a consistent finish that handles vehicle loads.
- **Patio Resurfacing**: Worn Cobb County patios get a moisture check and bond test before a troweled finish layer restores a clean, even surface for outdoor use.
- **Garage Floor Resurfacing**: Garage slabs with surface pitting or rough texture are prepped with mechanical cleaning and crack repair before the resurfacing mix is applied.
- **[Pool Deck Resurfacing](https://www.mariettaepoxyflooring.com/services/pool-deck-resurfacing)**: Pool decks exposed to standing water and sun get a thorough moisture assessment before a slip-resistant resurfacing finish is specified and applied.

- **Crack Inspection & Repair**: Depth and pattern mapped before any filler is applied.
- **Moisture Check**: Slab moisture measured to confirm substrate suitability.
- **Bond Test**: Pull-off test confirms adhesion before material is ordered.
- **Spalling Repair**: Surface spalling filled and feathered before finish application.
- **Skim Coat Finish**: Thin finish layer for slabs with minor surface flaws only.

## How to know whether your concrete slab can be resurfaced or needs replacing

The prep and assessment steps are what separate a resurfacing job that lasts from one that peels within a season.

Not every damaged slab is a good candidate for resurfacing. The installer checks crack width, depth and pattern to distinguish stable surface cracks from structural movement. Marietta’s hot summers and occasional freeze-thaw cycles accelerate spalling on driveways and patios, but surface spalling on a structurally sound slab is exactly the scenario where resurfacing holds long-term.

A moisture check and bond test follow the visual inspection. Clay-heavy soils common in Cobb County retain moisture that can wick into slabs from below, and applying a resurfacing mix over a damp substrate causes adhesion failure. If the slab passes both tests, crack repair and surface cleaning prepare the substrate for the new layer.

The resurfacing mix bonds to the prepared slab through a bonding agent applied immediately before the pour. Troweling produces a consistent finish thickness across the surface. Once cured, the installer performs a final bond check. You receive a written record of the materials used and the prep steps completed on your slab.

[Request Your Estimate](https://www.mariettaepoxyflooring.com/contact)

## Why choose us for concrete resurfacing in Marietta?

Every job is backed by a documented process from first assessment to final handover, nothing is left to guesswork.

- **Written Estimate Before Any Work**: You receive an itemized written estimate covering materials, layer thickness and cure times before anything is scheduled.
- **Surface-Prep Checklist on Every Job**: A checklist covering grinding, degreasing and crack repair is completed and documented before the resurfacing mix is applied.
- **Scoped & Quoted in Writing**: The assessment covers your specific slab, and the prep work is scoped and quoted in writing before anything is booked.
- **Final Curing Inspection**: Once the surface has cured, the installer runs a final bond check and hands over a written record of all completed steps.
- **Go/No-Go Assessment Included**: The slab is assessed for suitability before any material is committed, if resurfacing is not the right fix, you are told upfront.

## From enquiry to finished slab in three steps

1. **Request Your Estimate**: Tell us about the slab and we schedule an assessment covering crack depth, a moisture check and a bond test.
2. **Review & Approve the Plan**: You receive an itemized written estimate covering materials, prep steps, layer thickness and cure times before any work begins.
3. **Prep, Resurface & Inspect**: The installer completes the prep checklist, applies the resurfacing mix and hands over a written record after the final curing inspection.

[Request Your Estimate](https://www.mariettaepoxyflooring.com/contact)

## Typical Concrete Resurfacing Prices

| Job | Typical cost |
| --- | --- |
| Basic resurfacing | $3-$7 per sq ft |
| Decorative overlay resurfacing | $6-$12 per sq ft |
| Heavily damaged surface restoration | $8-$15 per sq ft |

These prices are estimates and often vary with the condition, size and scope of each job. Message us for a free, no-obligation quote.

[See all prices](https://www.mariettaepoxyflooring.com/pricing)

## Questions about concrete resurfacing in Marietta

### Can my existing concrete be resurfaced, or is it too damaged?

Most concrete can be resurfaced, but the slab must be structurally sound. Surface cracks, spalling, stains, and worn areas are all workable. Deep structural fractures, heaving from tree roots, or a slab that flexes underfoot usually point to replacement instead. A site assessment will confirm which category your concrete falls into.

### How long does concrete resurfacing usually last?

A properly applied resurfacing overlay typically lasts 8 to 15 years with routine maintenance. Longevity depends on surface prep quality, overlay thickness, traffic load, and how well the surface is sealed afterward. Thin skim coats on high-traffic areas wear faster than a full polymer-modified overlay applied at the correct thickness.

### How much does concrete resurfacing cost?

The guide price is $3-$7 per sq ft (Basic resurfacing). Heavily damaged slabs that need crack repair or grinding before overlay add to the total. You receive an itemized written estimate listing materials, layer thickness, and cure times before any work begins.

### What makes the price of concrete resurfacing go up or down?

Square footage, existing damage, and finish complexity are the main drivers. A flat broom finish costs less than a stamped or stained decorative overlay. Slabs needing grinding, degreasing, or crack repair before resurfacing add labor and materials. Access constraints, such as tight garage entries or multi-level patios, also affect the final figure.

### What is the cheapest way to resurface concrete?

A thin polymer-modified skim coat with a plain broom finish is the lowest-cost option. It covers surface wear and minor discoloration without decorative treatments. It suits low-traffic areas well, but it is not the right choice for driveways or garage floors that see vehicle loads, where a thicker overlay holds up far better.

### Should I resurface my concrete or replace it?

Resurface when the slab is structurally intact and damage is limited to the top layer. Replace when the slab has shifted, heaved, or cracked through its full depth. Resurfacing costs significantly less than a full pour and is usually the right call for driveways, patios, and garage floors with surface-level wear.

### Is a skim coat the same as concrete resurfacing?

A skim coat is one type of concrete resurfacing, but not the only one. Skim coats run 1/16 to 1/8 inch thick and address cosmetic wear. Full resurfacing overlays can go up to 1/2 inch or more, incorporate polymer bonding agents, and handle structural surface repairs. The right product depends on your slab’s condition and traffic load.

### Can I use a DIY kit instead of hiring someone?

DIY resurfacing kits work on small, lightly damaged areas with minimal prep needs. They require thorough cleaning, etching, and dry conditions to bond correctly, and most homeowners underestimate that prep. On driveways, garage floors, or anything over roughly 200 sq ft, inconsistent mixing and application thickness lead to peeling within a year or two.

### Which areas do you cover for Concrete Resurfacing?

We cover Concrete Resurfacing in and around Marietta, including Downtown Marietta, Cobb County, Atlanta, Fulton County and Cobb County. If your area isn’t listed, [send us a quick message](https://www.mariettaepoxyflooring.com/contact) to check.

## Get an Itemized Estimate for Your Slab

Tell us about the concrete and we’ll schedule an assessment and quote materials, prep steps and cure times in writing.

[Request Your Estimate](https://www.mariettaepoxyflooring.com/contact)

## Business details

### Contact

- **Email**: [contact@mariettaepoxyflooring.com](mailto:contact@mariettaepoxyflooring.com)
- **Based in**: Marietta, GA, 30066
- **Enquiries**: [Send an enquiry](https://www.mariettaepoxyflooring.com/contact) — We ask for your name, phone number, email and a message.

### Opening hours

- **Monday**: 08:00 – 18:00
- **Tuesday**: 08:00 – 18:00
- **Wednesday**: 08:00 – 18:00
- **Thursday**: 08:00 – 18:00
- **Friday**: 08:00 – 18:00
- **Saturday**: 10:00 – 16:00
- **Sunday**: 10:00 – 16:00
