ICRI-Profile Concrete Surface Preparation in Lockheed Martin

Production areas that pass inspection and stay online - clean, profiled concrete that bonds to coatings.

ICRI Profile Verification Checks
Moisture Control And Testing
Scheduled Production Downtime Windows

What We Do

Concrete surface preparation that helps property managers achieve consistent adhesion for industrial coatings

Covering staged diamond grinding, contaminant cleaning, crack repair, and ICRI-profile verification with documented checks.

Concrete Grinding
Multi-stage diamond grinding to remove imperfections and prepare a consistent profile.

Concrete Grinding
Multi-stage diamond grinding to remove imperfections and prepare a consistent profile.

Concrete Crack Repair & Stabilization
Targeted filler and sealant repairs to stabilize cracks before coating.
Surface Cleaning & Profiling
Grinding, degrease and pore profiling to achieve ICRI CSP readiness.

Why Marietta Epoxy Flooring

ICRI-style profiling with itemized layer specifications

When surface prep is incorrect, coatings fail and production stops; documented profiling and moisture testing reduce rework and unplanned downtime.

Common Challenges

Coating delamination from poor profiling
Insufficient profile or clogged pores prevent bonding, causing delamination under heavy equipment and costly production delays.
Moisture-related bonding failure in humid bays
Clay-based subgrade and high indoor humidity raise RH; trapped moisture causes blisters and failed adhesion within weeks.
Unscheduled downtime from rushed scheduling
Work squeezed into production hours leads to missed cure times, rushed prep, and higher risk of peel or rework.

How We Help

ICRI CSP 2-4 profile verification
Documented profiling confirms CSP 2-4 with measurements and photos so coatings are applied to adhesion-ready concrete.
Moisture mapping and RH testing
Calibrated in-situ RH readings and moisture mapping identify areas above limits and guide mitigation before coating.
Staged diamond grinding preparation
Multi-pass diamond grinding opens pores, removes contaminants, and creates a repeatable surface profile for consistent adhesion.
Crack repair and substrate stabilization
Targeted filler and sealant repairs stabilize fissures to provide a continuous substrate for overlays and traffic coatings.
Itemized prep specifications and cure times
Written estimates list materials, layer thickness, and cure times so production planners schedule accurate downtime windows.

ICRI CSP 2-4 profile verification
Documented profiling confirms CSP 2-4 with measurements and photos so coatings are applied to adhesion-ready concrete.
Moisture mapping and RH testing
Calibrated in-situ RH readings and moisture mapping identify areas above limits and guide mitigation before coating.
Staged diamond grinding preparation
Multi-pass diamond grinding opens pores, removes contaminants, and creates a repeatable surface profile for consistent adhesion.
Crack repair and substrate stabilization
Targeted filler and sealant repairs stabilize fissures to provide a continuous substrate for overlays and traffic coatings.
Itemized prep specifications and cure times
Written estimates list materials, layer thickness, and cure times so production planners schedule accurate downtime windows.

Who We Help

Facility teams and managers at manufacturing sites

Ideal for production, assembly, and maintenance areas where profiling, moisture control, and scheduling matter.

Facility managers scheduling floor works
Production planners who need prep aligned with downtime windows and documented profiling for quality control and audits.
Maintenance teams at assembly areas
Maintenance crews preparing equipment zones where contamination, humidity, and tight schedules require strict prep and testing.
Quality control teams requiring documented prep
QC staff needing photographic ICRI CSP records, RH readings, and layer specs to meet manufacturing floor standards.

How We Work

How Concrete Surface Preparation Works

Three steps to prepare concrete for industrial coatings.

Site assessment
We inspect the floor, map moisture, document cracks and target CSP so the quote lists required prep and realistic cure times.
Surface preparation
Execute staged diamond grinding, degrease, and crack repair with profile checks to achieve the specified ICRI CSP level.
Verification & handover
Record profile measurements, RH readings, and photos; provide an itemized report and scheduled re-entry times for production.

About This Service

About this Service

Concrete surface preparation for Lockheed Martin facilities uses staged diamond grinding, degrease, targeted crack repair and pore profiling to achieve an ICRI concrete surface profile suitable for industrial epoxy or polyaspartic systems. It suits manufacturing floors, equipment assembly areas, quality-control spaces and heavy-traffic warehouses that require consistent adhesion and flatness.

Moisture control is a central constraint because Cobb County's clay-based subgrade and temperature swings in manufacturing bays increase slab moisture risk. Quotes specify moisture-mitigation measures, a target ICRI CSP, layer thickness and cure times so coatings meet industrial adhesion and abrasion requirements.

Work is scheduled to align with production downtime and is often delivered in phases or off-shift windows to limit disruption and dust exposure to sensitive equipment. The expected outcome is a profile-verified, pore-open substrate ready for primer and specified topcoats, with a final curing inspection and documented handover; large areas demand phased cure scheduling.

Related Services Nearby

Epoxy Flooring Installation

Concrete Repair

Concrete Resurfacing

Concrete Polishing

Concrete Sealing

Terrazzo Flooring Installation

Concrete Surface Preparation

Traffic Coating Application

Garage Epoxy Coating

Pool Deck Resurfacing

Concrete Grinding

Self-Leveling Concrete Overlay

Frequently Asked Questions

Answers to common prep, schedule, and compliance questions

Short, practical answers about profile standards, moisture testing, and working inside industrial facilities.

Small cracks let moisture and movement break adhesion; within months coatings can delaminate. Early filler work avoids larger repairs and production rework costs.

Delaying RH testing risks applying coatings over damp concrete, causing blisters and bond failure. Correct testing prevents costly reapplication and production stoppages.

Yes. Coordinate with site safety for inductions, access control, and JHA requirements; we provide documentation and schedule work during approved downtime windows.

We target the ICRI CSP specified by the coating system, commonly CSP 2-4 for epoxy systems, and document the achieved profile with photos and notes.

Re-entry depends on material and cure times. We list layer thickness and cure windows on quotes so planners know exact restart times.

Yes. Trapped moisture under coatings can support microbial growth and weaken adhesion. Moisture mapping and mitigation reduce that risk before coating.

Who We Are

About Marietta Epoxy Flooring

Need a durable, easy-to-clean floor for a garage, basement, or commercial space? We help Marietta customers arrange epoxy flooring installations with local providers. Estimates list materials, layer thickness, and cure times to make scheduling and outcomes clearer.

Our Full Story

Our Mission & Values

We exist to provide long-lasting epoxy flooring solutions for Marietta homeowners and businesses by applying specification-led surface preparation and coating systems.

Transparent Estimates
Itemized quotes listing materials, thickness, cure time
Surface-First Prep
Diamond grinding, degrease, crack repair, profile checks
Scheduled Turnarounds
Defined windows to limit downtime, fast garage options

ICRI-Profile Concrete Surface Preparation in Lockheed Martin

Concrete Grinding

Concrete Grinding

Common Challenges

Coating delamination from poor profiling

Moisture-related bonding failure in humid bays

Unscheduled downtime from rushed scheduling

How We Help

ICRI CSP 2-4 profile verification

Moisture mapping and RH testing

Staged diamond grinding preparation

Crack repair and substrate stabilization

Itemized prep specifications and cure times

ICRI CSP 2-4 profile verification

Moisture mapping and RH testing

Staged diamond grinding preparation

Crack repair and substrate stabilization

Itemized prep specifications and cure times

Facility managers scheduling floor works

Maintenance teams at assembly areas

Quality control teams requiring documented prep