Skip to content

Outdoor Slab Renewal

Pool Deck Resurfacing in Marietta

A cooler, slip-resistant surface without replacing the slab, cracks filled, color restored, traction rated for wet use.

  • Written Estimate
  • Surface-Prep Checklist
  • Documented Handover
Modern outdoor swimming pool with light grey concrete patio and dark grey coping in a residential backyard.

What Goes Wrong

Why some resurfaced pool decks fail within a season

The coating is rarely the problem. The prep work underneath it usually is.

Skipped Moisture Test

Outdoor concrete slabs hold residual moisture that prevents a polymer overlay from bonding and curing correctly.

Moisture & Adhesion Testing

The assessment tests the slab before any primer goes down, so the overlay cures to a stable, bonded surface.

Unfilled Active Cracks

Coating over open cracks lets water undercut the slab from below, causing the new surface to lift and delaminate.

Crack Fill Before Coating

Every crack wider than a hairline is filled and allowed to cure fully before the overlay coat is applied.

No Slip Additive

A smooth coating alone can reduce traction around a wet pool area, making the surface more hazardous than before.

Texture-Rated Finish

A slip-resistant texture additive rated for wet surfaces is worked into the overlay before the UV-stable topcoat seals it.

Poor Surface Grinding

Dust, algae, and old sealer left on the slab stop the bonding primer from adhering, shortening the coating’s lifespan.

Grind & Pressure Wash

Surface grinding and pressure washing remove all loose material so the primer and overlay bond to clean, open concrete.

Scope of Work

What pool deck resurfacing covers

From crack repair to a finished UV-stable coat, here is what the work includes.

  • Surface Soundness Check

    Tap test to find hollow or delaminated areas before work starts.

  • Pressure Washing

    Removes algae, old sealer, and loose debris from the slab.

  • Bonding Primer

    Applied after grinding to lock the overlay to clean concrete.

  • UV-Stable Topcoat

    Seals the system against fading and pool chemical contact.

Outdoor Slab Renewal

What pool deck resurfacing involves and when your slab qualifies

Faded color, surface cracks, and slippery wet texture are fixable without pouring a new slab.

The installer begins with a concrete slab soundness check, tapping the surface to identify hollow or delaminated areas and measuring crack width and depth. Marietta summers bring intense UV exposure and heavy rainfall that accelerate surface breakdown, so cracks left open allow water to undercut the slab from below. Any crack wider than a hairline gets filled and allowed to cure before resurfacing begins.

Surface grinding and pressure washing remove loose material, algae, and old sealer so the new overlay has a clean substrate to bond to. Moisture and adhesion testing follow, because Cobb County outdoor slabs can hold residual moisture that prevents a polymer overlay from curing correctly. A bonding primer goes down before the acrylic overlay coat is applied.

The overlay is troweled or rolled to a consistent thickness, then finished with a slip-resistant texture additive rated for wet surfaces. A UV-stable topcoat seals the system against fading and pool chemical contact. The installer performs a final adhesion check before handover, and you receive a written record of the materials and finish applied.

Request Your Estimate

Why Choose Us

Why choose us for pool deck resurfacing in Marietta?

Every job comes with documented prep, written materials records, and a final inspection before handover.

  1. Itemized Written Estimate

    You receive a written estimate listing materials, layer thickness, and cure times before any work is scheduled.

  2. Surface-Prep Checklist Included

    Every job includes a documented checklist covering grinding, degreasing, and crack repair, nothing is skipped or assumed.

  3. Scoped & Quoted in Writing

    Every job on outdoor concrete slabs in the Marietta area gets the same documented process.

  4. Final Curing Inspection

    A curing inspection is completed at handover, and you receive a written record of every material and finish applied.

  5. No Work Before You Approve

    The assessment covers the slab and quotes in writing first. No work begins until you have reviewed and agreed the scope.

A stylish and spacious hallway featuring grey painted walls with white marble wainscoting, white doors with ornate frames, and a patterned terrazzo floor.
A tradesperson in yellow safety boots stands in wet, self-levelling screed, with a hose pouring more material and a levelling tool visible.

The Process

From first enquiry to a finished pool deck

  1. 01

    Request Your Estimate

    Tell us about your deck and we schedule an assessment of the slab and quote materials and prep in writing.

  2. 02

    Prep, Repair & Prime

    The installer grinds the surface, fills cracks, tests for moisture, and applies a bonding primer before any overlay goes down.

  3. 03

    Coat, Texture & Inspect

    The overlay and UV-stable topcoat are applied, the slip-resistant texture is finished, and a final inspection is documented at handover.

Pricing Estimates

Typical Pool Deck Resurfacing Prices

JobTypical cost
Basic pool deck resurfacing$4-$7 per sq ft
Decorative pool deck resurfacing$7-$12 per sq ft
Slip-resistant pool deck finish$8-$14 per sq ft
These prices are estimates and often vary with the condition, size and scope of each job. Message us for a free, no-obligation quote.
See all prices

Common Questions

Questions homeowners ask before resurfacing a pool deck

  • Can my pool deck be resurfaced without tearing out the concrete?

    Yes, in most cases the existing concrete stays in place. A resurfacing overlay bonds directly to the prepared slab, so demolition is not needed. The deck does need to be structurally sound, large voids or severely heaved sections may require spot repairs first, but surface wear, staining, and minor cracks are all handled during prep.

  • What is the best coating for my pool deck?

    A textured acrylic or polymer-modified overlay is the most common choice because it resists UV fading, pool chemicals, and wet-surface slip. Epoxy alone is not ideal outdoors, it yellows under UV and can get slick when wet. For Marietta’s heat and humidity, a breathable, slip-rated acrylic system with a UV-stable topcoat performs best long-term.

  • Will a resurfaced pool deck be less slippery?

    Yes. Most pool deck coatings include an aggregate broadcast, fine silica sand or aluminum oxide, embedded into the topcoat to create a textured, slip-resistant surface. The finish is designed to meet wet-area safety standards, so it grips bare feet even when the deck is soaked.

  • What happens before the new coating goes on?

    The slab is ground to open the surface profile, degreased to remove sunscreen and chemical residue, and all cracks are filled and feathered. Every job follows a documented prep checklist covering grinding, degreasing, and crack repair before any material is applied, so the overlay has a clean, mechanically bonded surface to grip.

  • How much does pool deck resurfacing usually cost?

    The guide price is $4-$7 per sq ft (Basic pool deck resurfacing). Every enquiry gets an itemized written estimate listing materials, layer thickness, and cure times before any work starts.

  • What affects the price of resurfacing my pool deck?

    Square footage is the biggest driver. Beyond that, the coating system chosen, the number of coats, and the condition of the existing slab all move the price. Heavily stained or pitted concrete needs more grinding time, and decks with multiple cracks require additional filler material, both add to the prep labor line on your estimate.

  • Will crack repair or prep work change my quote?

    Yes, significant crack repair or extra grinding adds to the total. The written estimate you receive itemizes prep work separately, so you can see exactly what surface-prep costs before committing. If additional damage is found once grinding starts, the scope is documented and discussed before any extra work proceeds.

  • What is the cheapest way to resurface a pool deck?

    A single-coat acrylic resurfacer is the lowest-cost option. It covers surface wear and restores color at a lower material cost than multi-layer polymer systems. The trade-off is a thinner build and shorter service life, so it suits decks in decent structural shape that need cosmetic renewal rather than heavy restoration.

  • Which areas do you cover for Pool Deck Resurfacing?

    We cover Pool Deck Resurfacing in and around Marietta, including Downtown Marietta, Cobb County, Atlanta, Fulton County and Cobb County. If your area isn’t listed, send us a quick message to check.

Get a Written Estimate for Your Pool Deck

Tell us about the slab and we’ll schedule an assessment and quote materials, layer thickness, and cure times in writing before any work is scheduled.

Request Your Estimate